bmfert.blogg.se

1. #Ats setting up multimon drivers
2. #Ats setting up multimon windows 10
3. #Ats setting up multimon code
4. #Ats setting up multimon mac

#Ats setting up multimon mac

Steps to setting up dual monitors on a Mac

#Ats setting up multimon windows 10

Step 9: Save the changes and your dual monitors on a Windows 10 computer is ready. Step 8: Now, click and drag them around to match their arrangement in real life, then click Apply. Here, your main monitor has been listed as 1 and the new one will be listed as 2. Step 7: Now, if you have selected the Extend these displays option, you will have to scroll back up to the Rearrange your displays section. Step 6: Once you've picked an option, click Keep changes. Step 5: Once you scroll down, you will see multiple options, such as Extend these displays, Duplicate these displays, Show only on 1 and Show only on 2.

Once the screen comes back, press the right click on the empty part of your PC's desktop. Step 3: Both screens will go black and might flicker a bit. Step 2: Use the VGA, HDMI, or USB cable, depending upon the computer. Step 1: Connect two monitors to the computer tower or laptop you're using. Steps to setting up dual monitors on a Windows 10 computer It will be counted as one of the monitors. You can set up dual monitors on a laptop as well. The two lines I added are at the very bottom, and the first thing I tried was matching the format with the rest of the lines, ie "vert_offset_xxxx"For connecting the monitors, you need the desired devices and cables to connect them. Uset r_multimon_vert_offset_left: 1.000000 Uset r_multimon_vert_offset_right: 1.000000

#Ats setting up multimon code

I wonder if I am putting them in the right spot though, because the rest of the code lines do not follow the "uset_r_multimon_" format. Uset r_multimon_vert_offset_left "0" Still no effect. Originally posted by ~~ Ryu:They should be added in this format: As with other config files, some little-used settings are not present but can be added. Not using multiple monitors, but you could try adding the vert_offset lines. I do not see any other text line that would indicate a way to move the center of the view up or down for the side monitors. I have changed that value as much as 2.0000 and it does not seem to have any affect. I have been using the multimon_config.sii file to modify the values, and the closest line I could find to that was this - vertical_fov_relative_offset: 0.00000. Can be used to move the left side view up or down to improve visibility of the mirrors given the limited vertical field of view.

R_multimon_vert_offset_left and r_multimon_vert_offset_right - Vertical offset in meters of the left/right monitor from the center one.

From the website linked above is this line. My side view are not lined up with the center, due to the slight size difference between the monitors. Originally posted by ttower:I was able to get almost everything set up in a way I was happy, but I am having trouble with one command. Depending of the size of your monitor frame, you can try a value between 1.2 and 1.4Īlso it is recommended to set g_interior_camera_zero_pitch "1" when using multimonitor layout.Īnother important note as it has not yet been written: Multimonitor in ETS2 and ATS only work when setting Nvidia Surround triple screen desktop layout if you have a Nvidia GPU or AMD Eyefinity when using AMD GPU (at least when using Windows, on Linux it works in a different way). When using in console, changes applied immediately.īezel correction can be set with r_multimon_border_fov_right and r_multimon_border_fov_left.

#Ats setting up multimon drivers

All settings in drivers seat configuration can be adjusted except fov setting.įor fine tuning of fov you can use r_multimon_fov_horizontal and r_multimon_fov_vertical in config.cfg or as command in developer console. It is a fixed layout where multimon_config.sii settings are not used. Here are some templates for multimon_config.sii for single/double/triple screen layouts:Īs mentioned in earlier post, settings in multimon_config.sii only take effect, when r_multimon_mode "4" in config.cfg is set.Ī simpler way is to use r_multimon_mode "2".